DT_INTs with 16F690

[Dick Ivers]

Thanks for the upgrade info.... version 1.00 now in place.
I need the Change on Port A function, so RAC_INT is it. Will check the data sheet on how to enable IOAC.

[ScaleRobotics]

I need the Change on Port A function, so RAC_INT is it. Will check the data sheet on how to enable IOAC.

I think with RAC_INT, you do not need to select IOAC, or IOAB bit. You only need to when using RABC_INT (which you might think of as an AorB_INT).