I rive in China. The address in my bio is just to confuse people.
|
I rive in China. The address in my bio is just to confuse people.
Charles Linquist
|
Theoretically I should be able to swap oscillators and the problem will be on the 877A. Give me a bit and I will try that.
Here is a link to the one I have on the boards.
http://mouser.com/ProductDetail/Kyoc...XFVfiWpjmqo%3d
Last edited by Tobias; - 29th January 2010 at 16:53.
|
I think Darrel nailed it with the oscillator problem. Nice catch. I just assumed you were
testing different PICs on the same board.
|
its the osc. I had no idea there could be that much variance. Can you suggest a better part number?
|
Woohoo!
I can taste it already.
DT
|
The datasheet for that resonator shows that they have other versions of the same thing but with tighter tolerances (down to 0.1%).Originally Posted by Tobias
At least it will have the same footprint.
With 0.1%, at 6000 RPM it will read between 5990-6010. (according to proteus).
DT
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks