Quote Originally Posted by Bruce View Post
You just have to prove that my recommendations throughout this thread (for this specific controller) were wrong, and show your solution to the problem - using the same controller.
I had missed post#22 while working with proteus, but it didn't matter ... it works too.

So, at the risk of loosing beer ... and buying chips ...
Other than the problems that were fixed earlier ... CCP1CON missing ... period instead if CCPR1L:H ...

This is the problem ....

The 4620's oscillator is running at 20.13 mhz

If it's a crystal, the caps are wrong or the crystal is off (or a radio crystal).
If it's a cheap resonator, then it's only to be expected.

That's my story ... and I'm sticking to it.
No way to prove it unless Toby checks it.

If I run the simulator at 20.13mhz, I get the exact same numbers across the board.
<br>