Interrupt RPM and Taylors Elapsed time on 18F4620

Results 1 to 40 of 71

Threaded View

  1. - 29th January 2010, 04:50 #11
    Bruce's Avatar
    Bruce
    Bruce is offline Prolific Poster
    Join Date
    Jul 2003
    Posts
    2,405

    Did you find this post helpful? Yes | No

    Default

    Hey Darrel,

    Disabling TMR1 after the event has zero affect on the value that CCPR1l & CCPR1H record at the time of the event. The value in Timer1 is captured immediatley on event.

    Can you recommend something for the OP that wiil fix it?

    If you can -- he gets the free PIC, and I'll send you a six-pack of your favorite BEER...

    FYI: Disabling the timer after the capture event has zero effect on the value captured by the hardware catpure module.

    Remember ... It's done in hardware
    Last edited by Bruce; - 29th January 2010 at 05:06. Reason: FYI
    Regards,

    -Bruce
    tech at rentron.com
    http://www.rentron.com
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules