Quote Originally Posted by Darrel Taylor View Post
Sounds like a good idea.

Use a different chip. That one may not work anymore.
<br>
I tested on a separate circuit with a 3.0Voltage supply using PIC16LF877A and this Ram chip. There was some results come out, but not correct....
For example I wrote 100 into the first 100 location and the result come out to be 66 most of the time but some are 65. If I worte 0~100 accordingly in from address 0~100. The reads are some data from 0~66, it is also increasing accordingly, along with address shifting higher...it is weired..
I was wondering whether there is some error with my codes for these setups....