Where to buy fast ceramic resonators


Closed Thread
Results 1 to 14 of 14

Hybrid View

  1. #1
    Join Date
    Jun 2007
    Location
    Mansfield, UK
    Posts
    697

    Default Where to buy fast ceramic resonators

    Hi, Does anyone know where i could buy some fast resonators? The fastest i could find are 24MHz from rapid. I was hoping for 40 and possibly 60MHz but none of my usual places have any. I would prefer to buy them from the UK but i dont mind buying overseas if its not going to cost too much. I would also like the 3 pin ones not 2 pin

  2. #2
    Join Date
    Jan 2009
    Location
    California, USA
    Posts
    323


    Did you find this post helpful? Yes | No

    Default

    It looks like Digikey has them up to 50 MHz (40, 48, 50).

    Don't know that helps you much in the UK, but you might grab the part numbers off the ones Digikey stocks and see if you can find them closer to home.


    steve

  3. #3
    Join Date
    Jul 2003
    Location
    Colorado Springs
    Posts
    4,959


    Did you find this post helpful? Yes | No

    Default

    You aren't planning to use them on a PIC are you?

    25mhz is the highest you can go for a PIC oscillator.
    DT

  4. #4
    Join Date
    May 2007
    Posts
    604


    Did you find this post helpful? Yes | No

    Default

    Actually it is 20MHz maximum for PIC16's and 40MHz for PIC18's using an oscillator in EC mode.

    For crystals/resonators the maximum is 20MHz for PIC16's and 25MHz (10MHz if PLL is enabled) for PIC18's in HS mode.

  5. #5
    Join Date
    Jun 2007
    Location
    Mansfield, UK
    Posts
    697


    Did you find this post helpful? Yes | No

    Default

    Yes i was planning to use them with PICs. Im using 24MHz at the moment with PIC18Fs (i know 16Fs can only do 20). Im pretty sure 18Fs can handle upto 60MHz or atleast the ones im using can (according to the datasheet). Even 40MHz would be a help tho. Im struggling at the moment cramming all my PWM code and extras into the 6M instructions you can get with a 24MHz resonator. I will also be looking at writing the code in slightly different ways but a better resonator would help a lot.

    Ill have a look at digikey. Ive already tried my local places but it seems that nobody really uses over 16MHz. Thanks for your help

  6. #6
    Join Date
    May 2007
    Posts
    604


    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by The Master View Post
    ...Ill have a look at digikey. Ive already tried my local places but it seems that nobody really uses over 16MHz. Thanks for your help
    That's because that is the highest that is useable with any PIC18 to get the fastest clock possible - 64MHz with the newer 3.3V parts.
    Last edited by rmteo; - 20th December 2009 at 01:00.

  7. #7
    Join Date
    Jul 2003
    Location
    Colorado Springs
    Posts
    4,959


    Did you find this post helpful? Yes | No

    Default

    Buy a 10mhz crystal with 2-22pF capacitors.
    Use the 4xPLL to get 40mhz.

    You can not run a 40mhz crystal or resonator from a PIC's oscillator.

    P.S.
    Use a crystal. Resonators have their uses, and you can figure out if it'll work in your application, after you have your application working.
    DT

Similar Threads

  1. Detect fast movement using photodiode
    By Pic2008 in forum mel PIC BASIC Pro
    Replies: 12
    Last Post: - 22nd November 2008, 14:07
  2. Which PICs to buy ?
    By AndrewC in forum General
    Replies: 10
    Last Post: - 18th August 2008, 23:05
  3. DIY KITs - Survey
    By T.Jackson in forum Off Topic
    Replies: 27
    Last Post: - 20th July 2007, 11:34
  4. Where to buy PICs in Miami, FL, or Orlando, FL???
    By manumenzella in forum General
    Replies: 0
    Last Post: - 6th May 2007, 20:13
  5. A/D on 16F877. How fast can I go?
    By atomski in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 8th April 2004, 06:51

Members who have read this thread : 0

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts