16 bit PWM using CCP1

Results 1 to 40 of 61

Threaded View

  1. - 22nd August 2014, 11:52 #16
    Dave's Avatar
    Dave
    Dave is offline Prolific Poster
    Join Date
    Mar 2003
    Location
    Commerce Michigan USA
    Posts
    1,166

    Did you find this post helpful? Yes | No

    Default Re: 16 bit PWM using CCP1

    What Acetronics2 is trying to say is, when accessing PBP variables inside of an ASM routine you need to prefix an underscore before the variable name such as "movf _PWM_VAL,W ; lb"
    As far as getting more resolution from the PIC processor, Your out of luck. You can always build your own digital pwm circuit with hardware if you are so inclined.
    Last edited by Dave; - 22nd August 2014 at 11:55.
    Dave Purola,
    N8NTA
    EN82fn
« Previous Thread | Next Thread »

Similar Threads

  1. Bits, Bytes Words and Arrays
    By Melanie in forum FAQ - Frequently Asked Questions
    Replies: 24
    Last Post: - 14th June 2016, 07:55
  2. Half-bridge PWM with a 16F684 ?
    By Byte_Butcher in forum General
    Replies: 7
    Last Post: - 17th January 2010, 22:18
  3. PICBasic newbie problem
    By ELCouz in forum mel PIC BASIC Pro
    Replies: 32
    Last Post: - 12th February 2008, 00:55
  4. How to tell which PICs can handle 16 bit variables?
    By MikeTamu in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 31st August 2005, 08:44
  5. USART interrupt not interrupting right
    By Morpheus in forum mel PIC BASIC Pro
    Replies: 12
    Last Post: - 6th March 2005, 01:07

Members who have read this thread : 2

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules