no work PULSOUT PORTB.2,255 i use all number from 0 to 1000 and the speed control no start the motor
Thunderbird 18 from castlecreations
|
no work PULSOUT PORTB.2,255 i use all number from 0 to 1000 and the speed control no start the motor
Thunderbird 18 from castlecreations
My Hobbies is PicBasic PRO
|
May be simply a look to the user manual ??? ...Originally Posted by jetpr
http://www.castlecreations.com/suppo...user-guide.pdf
and another look to general R/C signals values ...
From the time you " play " with those toys you should know all that.
NOW ... not a PbP issue at all !!! ... for sure
Alain
Last edited by Acetronics2; - 19th December 2009 at 12:01.
************************************************** ***********************
Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
************************************************** ***********************
IF there is the word "Problem" in your question ...
certainly the answer is " RTFM " or " RTFDataSheet " !!!
*****************************************
|
how i made the picbasic pro to do this
The ESC requires a 50Hz carrier signal between 1 millisecond and 2 milliseconds to operate. 1ms is zero throttle and 2ms is full throttle. You will not need to program the speed controller unless your robot requires a different voltage cutoff, brake disabled, or motor rotation direction
My Hobbies is PicBasic PRO
|
Which is a standard R/C PPM signal. 1-2ms pulse repeated every 20ms
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks