Hey Charles,
If you are still having trouble try changing EEADR to %10100000 and to tie A0,A1, and A2 on the eeprom chip to ground.
If that does not work then try it with and without the I2C_slow setting.
|
Hey Charles,
If you are still having trouble try changing EEADR to %10100000 and to tie A0,A1, and A2 on the eeprom chip to ground.
If that does not work then try it with and without the I2C_slow setting.
Dave
Always wear safety glasses while programming.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks