Newbie? Problem with LCD

[lew247]

Got it working at last
Thanks for all the help everyone.

I think the problem I had was I was trying to overwrite the inc files without realising.

I now have @ __config _CONFIG1, _HS_OSC & _WDT_ON & _MCLRE_ON & _LVP_OFF & _CP_OFF
as the config

However the programmer always tried to program in low voltage mode, I have to manually set it to off.

I'd like to sort that out, but I can live with it if needed.

Edit: Works with 16F877A but not 16F887 for some weird reason!

found it!

This works for the 16f887

@ __config _CONFIG1, _HS_OSC & _WDT_ON & _MCLRE_ON & _LVP_OFF & _CP_OFF
Define device 16F887
Define OSC 8
ANSEL=0  ' A/D disabled for ANS0 to ANS7
ANSELH=0 ' A/D disabled for ANS8 to ANS13
CM1CON0 = 0 ' Disable comparators
CM2CON0 = 0 ' These default to disabled at POR, but just in case
CM2CON1 = 0
adcon1 = 7
IOCB = 0
INTCON = 0
ansel = 0 
anselh = 0
PORTB  = %00000000
TRISB  = %00000000

However still got the programming issued I've got to set the low power programming to off manually and the oscillator to HS