hi ,can someone help to see where is problemes are
the output is only the first byte of data stored in a table
pic16f877A

ADCON0 = 0
ADCON1 = 7
define osc 20

trisB = 0 ' SET PORTB AS OUTPUT
PORTB = 0 ; SET PORTB t and C to 0
trisc = 0
portc = 0

trisd = 0 ; 2 pins of this port is for reset and clock


erasecode $500 ; erase code space @$500 (page 0)

B0 var word
StrAddr var word
F0 var byte
E0 var byte
k var byte
LOOP ; this loop display the value stored in the flash
b0 = 0 ; initial value
FOR StrAddr = 500 to 505 step 2 ; read a word
call display
NEXT StrAddr
goto loop
'--------------------

DISPLAY:
Peekcode StrAddr, b0 ; fetch a value from table
f0 = b0.lowbyte
e0 = b0.highbyte
call output1
return

'-----------
output1:
for k = 0 to 30 ; output 2 ports of B and C
call reset
portb = f0
portc = e0
call delay
next k
return

'-------------------------------------------------------
RESET: PORTd.2 = 1 ;RESET 4017 pin 16-PIC
@NOP
PORTd.2 = 0
RETURN
'-----------------------------------------------------------
DELAY:
pause 1 ;
portb = 0 ; reset portb , c
portc = 0
portd.3 = 1 ; clock the 4017 pin17-PIC
@nop
portd.3 = 0

return
end


pokecode @$500, $2a,$55 ,$55, $2a ,$55 ,$2a ; store data in flash mem

thnaks for all reply,