POOKECODE and PEEKCODE

[MINHLE]

hello Alain,

in the PBP the version is 3.0.0.5. (melab programmer and Picbasic pro compiler)
and also in the manuel book mentions to those commands.


thanks Alian,

regards,

[Acetronics2]

... soo simple

Pokecode DO NOT accept a variable as address ...

Obvious !

Once corrected ... compiles fine.

Alain

[MINHLE]

thanks ,
i try it

regards,

[MINHLE]

Hello agian Alian,

if POKECODE does not accept address avariable it becomes POKE.

in the case, i store serveral data in the POKECODE function.
i try it but only the datum stored at the specific location is shown up i.e at the location $11 that is $55;

i.e. i can write: POKE $11, $55, $2A

The output is only $55 (after compile)
but if i wrire

POKECODE $55, $2A ( location address is empty or a constant)

PEEKCODE ??? , OUT_STORAGE ( ??? Mean which address: the first datum is retrieved only, that is $55

and in case i would jump to the second location to pick up the datum (i.e. $2A) of that location how can I do?

I believe i do not have those functions?

thanks
regards,

[Acetronics2]

Really interesting point of view ... "this explains that ... "

have a good evening.

Alain

[MINHLE]

hello ALain,

youa re right.

the variable does nothing on the POKECODeE. after refresh my mind i relize taht. misunderstanding the address

thanks again for your help

regards,

the address

[Acetronics2]

Hi, Minhle

May be you might try the WRITECODE Command

a good night somtimes Helps ... to understand what is looked for. LOL

Alain