PIC16F819 LED not blinking

[Bruce]

Try the config line I posted above. What you're trying to do here isn't any good.

[ronbowalker]

Try the config line I posted above. What you're trying to do here isn't any good.

Okay...I now understand what is to be done, and the changes were made as you said to the .inc file. Compile is now error free. Pop-up window settings are now as per your suggestion. Sorry for the crazy rookie mistakes. Let's see what happens now....

Update...LED is on steady. No blinking

[Bruce]

Update...LED is on steady. No blinking

You might want to try something like this to see your LEDs blink;

DEFINE OSC 4 
@ __CONFIG _INTRC_IO & _WDT_OFF & _PWRTE_OFF & _LVP_OFF & _MCLR_OFF & _BODEN_OFF & _DEBUG_OFF
OSCCON = %01100000  ' 4MHz 
ADCON1=7 
TRISA = %00000000 
TRISB = %00000000 
TRISB.4 = 0 
TRISA.0 = 0 
PORTA.0 = 0 
PORTB.4 = 0 

LOOP: 
  PORTB.4 = PORTB.4 ^ 1
  PAUSE 250
  PORTA.0 = PORTA.0 ^ 1
  PAUSE 250 
  Goto LOOP

Check your PBP manual to see why your LEDs aren't visibly blinking with PULSEOUT...;o)

[ronbowalker]

You might want to try something like this to see your LEDs blink;

DEFINE OSC 4 
@ __CONFIG _INTRC_IO & _WDT_OFF & _PWRTE_OFF & _LVP_OFF & _MCLR_OFF & _BODEN_OFF & _DEBUG_OFF
OSCCON = %01100000  ' 4MHz 
ADCON1=7 
TRISA = %00000000 
TRISB = %00000000 
TRISB.4 = 0 
TRISA.0 = 0 
PORTA.0 = 0 
PORTB.4 = 0 

LOOP: 
  PORTB.4 = PORTB.4 ^ 1
  PAUSE 250
  PORTA.0 = PORTA.0 ^ 1
  PAUSE 250 
  Goto LOOP

Check your PBP manual to see why your LEDs aren't visibly blinking with PULSEOUT...;o)

Still no blink. Tried above program as well. PULSOUT did not work either...?

[ronbowalker]

I now have blimking LED's....

DEFINE 4 statement was not needed.