GPS $GPRMC to PIC16F684. Need help with SERIN2

Results 1 to 6 of 6

Threaded View

  1. - 25th November 2009, 09:01 #2
    ScaleRobotics's Avatar
    ScaleRobotics
    ScaleRobotics is offline Prolific Poster
    Join Date
    Feb 2006
    Location
    Gilroy, CA
    Posts
    1,530

    Did you find this post helpful? Yes | No

    Default

    I think you only have to invert for rs232, not TTL. So you could try non inverting, or move to pin 1 of the gps for rs232 tx and the specified resistor.
    Last edited by ScaleRobotics; - 25th November 2009 at 09:14.
« Previous Thread | Next Thread »

Similar Threads

  1. SLOW Serin2 and Serout2
    By dragons_fire in forum General
    Replies: 3
    Last Post: - 26th June 2009, 02:38
  2. GPS clock timing !
    By bethr in forum mel PIC BASIC Pro
    Replies: 11
    Last Post: - 3rd July 2008, 20:11
  3. SERIN2 digit parsing
    By skimask in forum mel PIC BASIC Pro
    Replies: 7
    Last Post: - 7th January 2007, 23:15
  4. Connecting GPS Engine Board to PC Serial Port
    By srspinho in forum GPS
    Replies: 2
    Last Post: - 28th April 2006, 12:10
  5. GPS Receiver
    By lester in forum Adverts
    Replies: 2
    Last Post: - 22nd February 2006, 12:47

Members who have read this thread : 1

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules