PIC to PIC TX RX and PIC to PC COM RX ..a little help please

[Dennis]

Dave ...........

IT works :-)

16F887 runnning @ 8 MHz internal clock
to 18F4520 running @ 32 MHz internal clock
to PC com port @ 2400bps 8N1

and the readout in plain text at MCS serial tool/hyperterminal is...
I received the number 93
I received the number 93
I received the number 93 etc
:-)
Not sure why it's not just displaying the number 3 which is what I was expecting ... a bug in the code for HSER lines perhaps ????

But besides that .....YAY !

And now for the next mission ....
RF TX/RX ....

Only 5 step process for now ( or more LOL depending on the TX/RX protocol,modules and more I guess --wish me luck !)

1. Wire up RF modules to PIC's
2. Remove existing TX/RX wires between PIC's ( keep avaiable for tests)
3. Wire the transmitter PIC's TX to RF TX module
4. Wire the receiver PIC's RX to RF RX module
5. Test for comms :-) << hold thumbs

Any tips would be highly appreciated and noted !

Kind regards

Dennis