Newbie: Need help with Voltage Monitoring

[Acetronics2]

Hi, Megazezherts

first of all , you can have a look to Melabs Examples ...

http://www.melabs.com/resources/samp...ge_Monitor.bas

for example ...

Alain

12C671 is rather an old chip ... you'd better try 12F675 which is easily reprogrammable ... and wayyyyyy lower cost !!!

[Megahertz]

Hi, Megazezherts

first of all , you can have a look to Melabs Examples ...

http://www.melabs.com/resources/samp...ge_Monitor.bas

for example ...

Alain

12C671 is rather an old chip ... you'd better try 12F675 which is easily reprogrammable ... and wayyyyyy lower cost !!!

Thanks Alain. I just happen to have few 12C671 with me and I will ofcourse use flash type if I make somthing serious than glowing few LEDs.
I checked the code at the link and I understood what the code is doing but left little confused about the hardware setup. Is it possible you can explain it briefly? Thanks