X10 commands and PBP

[aratti]

Several months ago, I did post for a problem faced with the XIN instruction, in conjunction with HSEROUT. Well after several experiments I came to the conclusion that HSEROUT has nothing to do with the problem, which depend exclusively on the XIN instruction! which doesn't work properly.

I tested XIN with several different pics (16F84; 16F88; 16F628; 16F876) and the XIN instruction fails to work with them all.

Sending an X10 command, the X10 device addressed, respond as it should while the testing device (which shold read the same command with the XIN instruction) reports always Home 17 and Key 10 whatever X10 command is sent.

On the contrary the XOUT instruction works correctly.(using the same powerline interface)

I wonder to who, I must address this issue to see if it is possible to remove the problem and be able to use the XIN instruction.

Any suggestion is welcome.

P.S. (I have PBP 2.47)

Al.