Garbage in from RFID

[lilimike]

Sphere,

You sent me to the right direction and I finally got it working, I spent a lot of time trying to understanding the mode value from serin2 because in the PBP manual it says bit 15 is not used but it is not specified anywhere (that I could find) that it should be set to 1 but I got it now.

Thanks for your help.

Mike

[Sphere]

No problem.

Sphere

[berke1984]

'************************************************* ***************
INCLUDE "MODEDEFS.BAS"

'***********************DEFINITIONS*************** ************************
DEFINE Osc 4
'--------------------------------------------------------------------------------------------
'***********************SERIAL COMM DEFINITION**********************
DEFINE HSER_TXSTA 24h
DEFINE HSER_RCSTA 90h
DEFINE HSER_BAUD 19200

DEFINE LCD_DREG PORTb
DEFINE LCD_DBIT 4
DEFINE LCD_RSREG PORTb
DEFINE LCD_RSBIT 0
DEFINE LCD_EREG PORTb
DEFINE LCD_EBIT 3

cmcon=7
trisb=%00000010
trisa=%00000001

a var word
b var word
c var word
d var word
e var word

ANAPROGRAM:

hserin [hex2 a,hex2 b,hex2 c,hex2 d,hex2 e]
pause 50
LCDOut $fe, 1,hex2 a,hex2 b,hex2 c,hex2 d,hex2 e
pause 10

goto anaprogram

end