Quote Originally Posted by Kenjones1935 View Post
Fellow MicroChip PICers,

I have a PICkit 2. On the board is a PIC16F887. It is printed on the chip. I can read it with a magnifying glass. Also on the board are clearly marked in white ink the signal designations. These marks agree with page 36 of DS41296B 44-PIN DEMO BOARD USER'S GUIDE.

On page 8 of Microchip's DS41291F "PIC16F882/883/884/886/887 Data Sheet is the pin designations for PIC16F884/887.

The printing on the circuit board and the diagram on page 8 do not agree. On the circuit board PIC pins 33 and 34 are not connected. On page 8 these pins are RA6 and RC0 respectively.

On the circuit board these designations are given to PIC pins 31 and 32 respectively. (see attached)

What is UP?? and HELP???

Ken
Your board has a 16F887 in a TQFP package, not DIP, right?

See page 12 for the TQFP pinout...

steve