How do I give a radio control car autonomous control

[mackrackit]

Here are a few screen shots that might help..
This is the first thing you need to do when starting MCS.


Then on the first tab click "Find Automatically". It should find PBP in the root directory. Do not check "Use PBPL", that is only good for 18Fs.


Then on the "Assembler" tab check "Use MPASM" and click "Find Automatically". Check the other radio buttons as shown.


Now you will be able to hit the F9 key to generate the *.hex file. Use the PicKit2 software to program the chip.

Let us know your progress.