Serout and 18F87J50

[ScaleRobotics]

Hello Glenn, and welcome to the forum!

With the PIC18f87j50 you have a couple options.

Normally hserout and hserin need a rs232 inverter.... But with that chip you can use the DTRXP: Data/Receive Polarity Select bit to invert your USART port. See http://www.picbasic.co.uk/forum/showthread.php?t=10361

Or, you can use serout driven inverted.

It would help us to know what you have so far, as far as config fuses, and code, as well as mhz, as all your serial settings will depend on this.

Here is a calculator for finding the values to set for baud rate:
http://www.picbasic.co.uk/forum/atta...achmentid=2957