Hi,

First I must say thanks for the quick reply; I have try all speeds from 1200 to 115200 and every setting I can think of. ( Serout Portc.7, 9600, ( and all the rest ), “Hello” and all I get is junk at the PC. ( Unless I use a Max232 ), this is not what I’m looking for.

The circuit is using an TUSB3410, it go’s like this the 18F87J50 pins C7 and C6 go to the TUSB3410 then to the USB on the PC, on the PC we have to use a Ver com port, so I think the problem is setting up the TUSB3410.

Well thanks, if you know any one that has the same circuit and has it working let me know.

Thanks
Glenn