Pickit3 from Microcode Studio


Closed Thread
Results 1 to 21 of 21

Hybrid View

  1. #1
    Join Date
    Dec 2007
    Location
    Finland
    Posts
    191


    Did you find this post helpful? Yes | No

    Default Re: Pickit3 from Microcode Studio

    Cmd line MPLAB via MicroCode Studio and PICkit v3.10 seems to work now OK, which is good

    But, GUI MPLAB's still seems to have some issues:
    MPLAB X IPE v2.00
    Target device was not found. You must connect to a target device to use PICkit 3.


    MPLAB IDE (v8.92)
    PK3Err0045: You must connect to a target device to use PICkit 3.

    Firmware upgrades/changes were successful in both GUI environments.
    In all cases I have used same HW, so that is not an issue (and yes, PIC was connected to PK3). I think issue in PICkit SW...

    My PICkit 3 is real Microchip one (made in China). Same poster was in package
    Last edited by Gusse; - 25th January 2014 at 19:11.

  2. #2
    Join Date
    Oct 2005
    Location
    Sweden
    Posts
    3,612


    Did you find this post helpful? Yes | No

    Default Re: Pickit3 from Microcode Studio

    Hi,
    How do you power your circuit?
    Depending on how the command line switches are set it may be that the commaŽnd line interface is set to provide power to your circuit while, when you you're programming from within MPLAB, thePICKit3 is not set to provide Power to the circuit.

    /Henrik.

  3. #3
    Join Date
    Dec 2007
    Location
    Finland
    Posts
    191


    Did you find this post helpful? Yes | No

    Default Re: Pickit3 from Microcode Studio

    Thanks Henrik!

    It seems that GUI MPLAB's needed additional setting to power the target.
    Power -> Power Target Circuit from Tool (ICSP Options)

    Now it work like a charm.

Similar Threads

  1. 16F877A Microcode Studio won't compile
    By curt66111 in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 25th November 2009, 19:35
  2. Microcode studio loader problem
    By woodygjw in forum General
    Replies: 2
    Last Post: - 10th September 2007, 01:18
  3. Microcode studio and USB pics
    By KPDes in forum mel PIC BASIC Pro
    Replies: 7
    Last Post: - 27th May 2007, 09:28
  4. Replies: 2
    Last Post: - 9th February 2006, 22:03
  5. How to used ICD of microcode studio
    By chai98a in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 19th November 2005, 00:29

Members who have read this thread : 0

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts