Sure Bruce, I will let you know as soon as possible. Thanks.Originally Posted by Bruce
|
Sure Bruce, I will let you know as soon as possible. Thanks.
|
Results for the hex files...
Hi, Bruce. The PICs with these hex files are not working. So I put my setup on a breadboard and by using a piece of wire between GP.5 of both. I do see a voltage pulse on GP.5(Tx) of the Transmitter but no response from the receiver. I used 2400 Baud. I await your feedback.
Last edited by FromTheCockpit; - 15th November 2009 at 15:41.
|
Can you post photos of what you have assembled & indicate which RF modules, power supply, etc you're using?
|
Here is the photo of my bread-board setup. The LED to right of the 1uF Cap is for power indication.
I don't have any technical details about these modules apart from that they are ASK based and are for short range RF applications. I have tested other simpler codes with them and PT enc/dec as well, everything works perfectly. They don't have any sort of marking on them as well so I can search the internet.
My power supply if from 7805. Power supply is ok as I keep testing small projects every other day.
Last edited by FromTheCockpit; - 15th November 2009 at 17:01.
|
Made a slight adjustment. These should work on pretty much any RF modules.
Let me know if this version works for you.
|
P.S. It's really hard to tell with that blurry yellow photo, but I would be a tad hesitant on lighting the LED on D3. It looks like the LED is wired direct to gnd on the cathode end?
|
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks