|
Hi Tobias,
Power up timer enable and insert a short pause in the start up code of your PIC to allow the serial LCD time to stabilize, .01 µF at the PIC power pins and make sure the serial out line has the proper pull up / pull down resistors as required. Pull up for data TRUE, pull down for data INVERTED. This allows the port to idle in the correct state. Be sure to provide a pull up resistor on the MCLR if you have enabled it in your config statement.
HTH
JS
If you do not believe in MAGIC, Consider how currency has value simply by printing it, and is then traded for real assets.
.
Gold is the money of kings, silver is the money of gentlemen, barter is the money of peasants - but debt is the money of slaves
.
There simply is no "Happy Spam" If you do it you will disappear from this forum.
|
Thanks guys I appreciate the input I will give it a go with the suggested changes when I get home on saturday.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks