I WROTE my .hex file into the PIC32. It did not object too much. Now what? Small addresses in the FLASH remained 'FF'. Here's a shot of the transition.

1D0069C0 FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF
1D0069D0 FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF
1D0069E0 FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF
1D0069F0 FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF
1D006A00 0F401A8E 00000000 0F4073A0 00000000
1D006A10 1000FFFF 00000000 27BDFFE8 AFBF0010
1D006A20 40046800 0F402166 00000000 8FBF0010
1D006A30 03E00008 27BD0018 27BDFFD8 AFBF0020
1D006A40 AFB3001C AFB20018 AFB10014 AFB00010
1D006A50 3C0204C4 3451B400 0F4073EA 24130005
1D006A60 00409021 24030040 3C02BF88 AC432004
1D006A70 02201821 00008021 3C02FE36 34453C80
Now What? Does it dance and sing? Do I connect a hyperterminal via an old fashioned USB cable to the provided USB connector? Do I push the RESET button and the PROGRAM button? Any ideas?

I'm in a bit of a rush. I'll look at your videos later this evening.

Ken