Here is a proto board that will carry all my parts and then some. Each board has two rows of 62 pairs of bussed 0.1" centers pin holes.

http://www.circuitspecialists.com/prod.itml/icOid/6888

I need 20 paired pins for the forty pin 16F887, 48 paired pins for the 6 sixteen pin DPDT relays, 7 paired pins for the fourteen pin SN7407, 6 isolated pins for the USB device and three isolated pins for the 5v regulator.

The board is 6 and 1/2 by 3 and 1/8 inches. That fits fine on my 1/10 scale hobby level SPRINT (the belt up the middle driving the front wheels is a problem that can be overcome) and my toy level 1.10 and 1.12 scale toy cars.

Is that a plan, or what?

Ken