I need to be able to connect my PICkit 2 to three SRF05 sonar sensors. The easiest way would be to solder J or JR (or whatever - I do not know one connector from another) headers to the board.

I looked carefully at the connectors that came with my radio control car. The pin separation does not match the hole separations in my PICkit 2 forty four pin demo board. Do any of you know the name of the connector header - if it exists - that would solder directly into that row of holes along the sides of my proto card? They are definitely not 1/10 inch centers. I have no means to measure their separation accurately.

Ken