PBP projects for R/C models

Results 1 to 40 of 772

Threaded View

  1. - 2nd March 2010, 16:24 #24
    Archangel's Avatar
    Archangel
    Archangel is offline SuperMod
    Join Date
    Aug 2006
    Location
    Look, behind you.
    Posts
    2,818

    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by Kenjones1935 View Post
    Joe,

    Are you saying that all I need to do to use PORTB is figure out how to appropriately configure it?

    If so, please give me a hint? I am soooo close.

    Ken
    Ken,
    I am not an expert on pulseout or pulsein, and I have not read the manual lately, but I believe they are digital commands, which by default should require you to disable the analog functions on the pin you are using.
    On this chip you have,
    ADCON0
    ADCON1
    ANSEL
    ANSELH
    CMCON0
    CCP1CON
    CCP2CON
    CM1CON0
    CM2CON0
    CM2CON1 and a couple more which all have effect on the I/O. Get into the data sheet and read about them, they are all listed in the index of the data sheet, and see how to set them up. Remember if a bit is SET it is a 1 if cleared it is a 0.
    When you come out of the data sheet you will be a much more "Savy" programmer.
    Last edited by Archangel; - 2nd March 2010 at 16:26.
    If you do not believe in MAGIC, Consider how currency has value simply by printing it, and is then traded for real assets.
    .
    Gold is the money of kings, silver is the money of gentlemen, barter is the money of peasants - but debt is the money of slaves
    .
    There simply is no "Happy Spam" If you do it you will disappear from this forum.
« Previous Thread | Next Thread »

Similar Threads

  1. PBP Book
    By Bruce in forum Off Topic
    Replies: 83
    Last Post: - 4th October 2021, 13:55
  2. PBP Extensions, What are they?
    By PJALM in forum PBP Extensions
    Replies: 9
    Last Post: - 28th September 2021, 12:26
  3. Compiler differences between PBP 2.33 & 2.46
    By nikopolis in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 2nd May 2006, 20:01
  4. Newby- PBP wont compile for 18F (MPLAB)
    By jd76duke in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 18th December 2005, 00:30
  5. Making PBP code more modular
    By forgie in forum General
    Replies: 30
    Last Post: - 25th October 2005, 17:24

Members who have read this thread : 2

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules