PBP projects for R/C models

[thronborg]

Hello
Actually i have this code for display the value on a LCD. Now i want the value of 0 to be 1mS puls and 255 to be 2mS puls.

Se attached drawing.

' Name        : ServoTester.pbp
' Compiler    : PICBASIC PRO Compiler 2.6
' Assembler   : PM or MPASM
' Target PIC  : PIC16F690 or similar type compatible with LAB-X20 board
' Hardware    : LAB-X20 Experimenter Board
' Oscillator  : 4MHz external crystal
' Keywords    : ADCIN, LCDOUT
' Description : PICBASIC PRO program to read pot and display on LCD.
'                        FUNKAR ROR EJ

' Define LCD pins
Define LCD_DREG  PORTC   'LCD data port
Define LCD_DBIT  0       'LCD data starting bit 0 or 4
Define LCD_RSREG PORTC   'LCD register select port
Define LCD_RSBIT 4       'LCD register select bit
Define LCD_EREG  PORTC   'LCD enable port
Define LCD_EBIT  5        'LCD enable bit

' Allocate variables
x Var Byte

   ANSEL = %00000100    ' Set PORTA.2 analog, rest digital
   ANSELH = %00000000
   Pause 100            ' Wait for LCD to start

mainloop:
   Adcin 2, x           ' Read ADC value on AN2 (PORTA.2)
   Lcdout $fe, 1, "Pot1 = ", #x ' Send value to LCD
   Pause 50            ' Do it about 10 times a second
   Goto mainloop        ' Do it forever
   End[/I][/I]

Hope this help
Thronborg

Servo Tester.pdf