PBP projects for R/C models

[Kenjones1935]

I think my PICkit2 is correctly connected. I may have typo'd J5 and/or J6. Here's what I have been doing.



If I attach the USB and the PICkit2 I get the blue POWER light. My Hyperteminal does seem to see the PIC. If I eliminate ASCII echo and I type 'hello' I do get 'hello' on my Hyperterminal GUI. That is GOOD. Trouble is I disconnected the PICkit2 and reconnected and HELLO no longer appears.

I did not connect PICkit2 pin6. That is used as an input to the "LOGIC TOOL".. Everything seems normal except for that error message (about maximum). It seems to download the .hex correctly. But nothing happens. ie the EEPROM embedded code does not to do anything visible. If there were a LED blinking example I could try debugging. The HELLO WORLD would not embed.