Hello from Newbee!
I searched for Servo Tester and didnt find anything here so here is my problem. I really cant figure out the mathematics for this.
I made a servotester that output a puls from 0.5mS to 2.5mS (Its more than i need)
I have a pot that give an input of 0 to 255.

Q1: How do i get the Pot in one direction 0, to be 0.5mS and in the other direction 255 to be 2.5mS?

Q2: I have a similar problem with the Servo current sensor that give 2.5V at 0mA and 0,25V/mA.

Thanks in advance.