PBP code to read R/C signal from receiver

[malc-c]

Edit:

This seems to work

main:
       PulsIn signal, 1, pulse ' reads signal from receiver

       IF (pulse >= 100) AND (pulse <= 160) Then
          Low GPIO.0 ' turns LED off
       Else
            High GPIO.0 ' turns LED on
       EndIF

       GoTo main

seems the range between >= and <= was the issue

[Acetronics2]

There was no issue, Malc

Led OFF for Neutral , ON for everything else.

a bit surprising, but ... it is !

Alain

[malc-c]

No issue, just the the original range didn't work. Once I changed the values between the <= and >= then it worked !

[DanPBP]

I'm glad the code worked for you... Wish there were more threads about R/Cs electronics... I own 25 R/C trucks from Traxxas and now a heli clone of the Trex500 and many of them have PICs turning on/off lights, flashers, blilnkers, neons, sirens, and a few more things... PICs are great for R/C projects!!!

[malc-c]

Dan, have to agree with you. It would be nice to see some more RC related PIC / PBP stuff.

Maybe we could start a thread and request the mods to sticky it in the code examples section ????