18F4550 - Does strange things on D ports

[mackrackit]

I have some more problems with the microprocessor.
I only use the 18F4550 because of the memory 32KB memory and 2048 SRAM.

I don't use any USB functions and only control a LCD and a few inputs and outputs for RS232 data.

It looks like my include file is wrong or does some stramge settings.
Can somebody please tell me how to configure the INCLUDE file so I disable all the USB functions and set the OSC to 20 MHz?

Being I do not see the configs in your code I will assume you are changing the *.inc file.
I may be wrong but I think you think the configs can be changed in MPLAB...Nope.

Please post the inc.

This is also helpful.
http://www.picbasic.co.uk/forum/showthread.php?t=543

[NL2TTL]

Thank you very much for the feedback from all of you.

The Byte[74] I changed to [80] already but the biggest problem was the following:

In the main routine I call the SUBROUTINE Check_RS232

GOSUB Check_RS232

In the subroutine when the 10ms counter ends and there is no data I don't do a Return but a hard goto Main. So I get unfinished GOSUBS

SERIN RS232_In,N9600,10,Main,DigiData[0]

After changing the code to check for serial data in the main routine and don't use the GOSUB the problem was solved.

[Darrel Taylor]

Dang, I should have seen that.

Thanks for the update.
<br>