LCD Blink

[mister_e]

ayeeeeee. O.K.

I'll try to make your life easier with some question and answer

1. Do you want to avoid LCD blink when you refresh your display?

This can be caused by the slow baudrate you're using or the delay between each LCD refresh.

Usually when using a PAUSE of 100 ms between each LCD refresh is good.

Try this

start :

     SerOut 1, N2400, [254,1,"EGT=",#EGT] ' this line clear the LCD 
                                          ' and display on the
                                          ' first line in one shot
     pause 100
     goto start

2. Do you want to refresh only one part of your display. I mean only the section after "EGT=" ?

In your case, try this one

SerOut 1, N2400, [254,1,"EGT="]
start :

     SerOut 1, N2400, [254,$84,"     "] ' this line clear 5 character
                                        ' after "EGT="
                                        '
     SerOut 1, N2400, [254,$84,#EGT]    ' this line display your result
                                        ' right after "EGT="
     pause 100
     goto start

I hope this is what you're looking for.

I'm i right but you speak spanish? If yes, let us know, i think that some user can translate for you.

WHO'S SPANISH HERE???

P.S: a i see you just edit your post, perhaps the 2nd code example will work.