LCD Blink

Results 1 to 6 of 6

Thread: LCD Blink

Threaded View

  1. - 6th February 2005, 22:23 #3
    jetpr's Avatar
    jetpr
    jetpr is offline Member
    Join Date
    Jan 2005
    Location
    Puerto Rico
    Posts
    133

    Did you find this post helpful? Yes | No

    Question Blink LCD

    In set of using Clear the Screen with the LCD command ...

    Who i ken clear the Screen with out the LCD command for clear to avoid the blink screen..

    my problems is when you print to the LCD example...
    Start:

    Run=125
    SerOut 1, N2400, [254, LCDLine1,"Run=",#Run]

    Display Run=125

    but the problem is

    Run=12
    SerOut 1, N2400, [254, LCDLine1,"Run=",#Run]

    Display Run=125

    goto Stat

    the number 5 is from the one before and if a use the clear command then you si the screen blink..
    this ken be done by send spaces but i look blink and with the command for lcd...


    my ingles is not good so i dot now is a explain correct...

    I appreciation the help ..
    Last edited by jetpr; - 6th February 2005 at 22:38.
« Previous Thread | Next Thread »

Similar Threads

  1. Is this code not initialising the LCD properly?
    By Platypus in forum mel PIC BASIC Pro
    Replies: 8
    Last Post: - 30th January 2010, 19:14
  2. 16f688 LCD what have I done wrong
    By spitfiredriver in forum mel PIC BASIC Pro
    Replies: 6
    Last Post: - 8th August 2009, 19:54
  3. Play with LCD on PICDEM
    By The IceMan in forum mel PIC BASIC
    Replies: 5
    Last Post: - 22nd August 2008, 16:56
  4. LCD Problem
    By karenhornby in forum General
    Replies: 3
    Last Post: - 19th June 2008, 11:43
  5. LCD will not start
    By btaylor in forum mel PIC BASIC Pro
    Replies: 49
    Last Post: - 24th May 2007, 02:30

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules