HElp Please.

**Dave** · - 15th October 2009, 18:47

joseluistajada, Have you set the TRIS register to determine which ports will be inputs and outputs?

Dave Purola,
N8NTA

**Darrel Taylor** · - 15th October 2009, 19:38

Code:

ANSEL = 0
ANSELH = 0

- OR -

Code:

INCLUDE "ALLDIGITAL.pbp"

**Glenn** · - 15th October 2009, 20:46

Originally Posted by Dave

joseluistajada, Have you set the TRIS register to determine which ports will be inputs and outputs?

You dont need to set the pins to outputs when using "high" and "low".

It's probably the analog part that is the problem just as darrel writes.

**mackrackit** · - 15th October 2009, 21:22

PBP did not support this chip before the patch of 2.46.

Go here to get the patch
http://www.melabs.com/support/upgrade.htm#pbp

Thread: HElp Please.