I am confuse

Results 1 to 20 of 20

Thread: I am confuse

Threaded View

  1. - 16th October 2009, 17:12 #14
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653

    Did you find this post helpful? Yes | No

    Wink

    Hi, Mel

    my prehistorics datings ( 14 Carbide ...) are V2.21 ...

    Code:
    mainloop: ADCON0.2 = 1		' Start Conversion

notdone: Pause 5
	If ADCON0.2 = 1 Then notdone	' Wait for low on bit-2 of ADCON0, conversion finished

	adval = ADRESH		' Move high byte of result to adval
    of course it's impossible you knew it, may be your grand'dad ...

    I suspect " Pause 5 " here for 10,000 microns handcarved silicium "1650" processor ( PIC's ancester )...

    Regards
    Alain
    Last edited by Acetronics2; - 16th October 2009 at 17:19.
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
« Previous Thread | Next Thread »

Similar Threads

  1. Pic to GSM Phone connection (HSerin problems)
    By bitmaniac in forum GSM
    Replies: 288
    Last Post: - 25th August 2008, 16:53

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules