i cant get 18f2550 work as HID

[Darrel Taylor]

The top line says DEFINE OSC 48

Which seems correct from the image of the configs which shows an 8Mhz crystal with HS_PLL that gives 96Mhz.

The USBPLL is /2 so the USB gets 48Mhz, and the CPUDIV is also /2 so it's running at 48Mhz.

Except for the LVP, it all seems good.

Well, might want to disable XINST too.
<br>

[Ahmadabuomar]

thx for ur reply

i ll try to disable lvp and xinst and see what happen

brb

[Ahmadabuomar]

OMG, it worked

thaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaank you Darrel for taking time to read the code and reply me. thank u very much

and thx pedja for trying to help.

Darrel, why LVP is so important in this case?

i thought LVP stands for low voltage programming. and since i used k128 usb programmer i thought lvp must be enabled ( i read once that k128 uses low voltage programming for usb compatible pics).

[Darrel Taylor]

Great News! And you're welcome.

I'm not familiar with the K128 ...
But with a quick look at the schematic in the datasheet, it seems to use a series of diodes and capacitors to increase the voltage and applies it to VPP.

They have several different programmers.
The LVP comment might have been directed at a different product.

But when LVP is enabled ... anytime RB5/PGM goes HIGH ... it's just like taking MCLR/VPP to 13V.
If it's left floating, the PIC could be constantly entering Program Mode from input noise.
<br>

[Ahmadabuomar]

Great News! And you're welcome.


But when LVP is enabled ... anytime RB5/PGM goes HIGH ... it's just like taking MCLR/VPP to 13V.
If it's left floating, the PIC could be constantly entering Program Mode from input noise.
<br>

well, thats something new to learn. thx Darrel

i m now trying to control a robtic arm using USB communication. i m reading about intruppts. i ll report my work in this thread.

[Ahmadabuomar]

hi

i need to know more about interrupts. when using usb communication i have to excute usbservice every milisecond or so. should interrupts help me ?

[Darrel Taylor]

... i have to excute usbservice every milisecond or so. should interrupts help me ?

They will indeed.

Here's an include file that can do all the servicing for you in the background using the USB interrupts.
And it adds a few handy features ...

USB_ASM_Service.pbp
http://www.picbasic.co.uk/forum/show...06&postcount=6

HTH,