Instruction set PIC12F675

[Lionheart]

Hey,

I'm writing a program in assembler language and i didn't find the multiply or divide opcode back in de instruction set.

Is it wrong of me to assume that you can't myltiply or divide with the PIC12F675 or the whole PIC12 family?

Thanks at advance,
Ward

[Acetronics2]

Hi, Ward

I do think you're a beginner ... so, ...

1) only the 18F,24,33 and 32 series processors have the HARDWARE multiplication aboard ...

2) You are on a PICBASIC PRO Forum ... as the Compiler name states ... it's BASIC language and not assembler ...

From 1) you understand the 10,12 and 16 series only can use SOFTWARE multiplication ...

From 2) that you are not in the best place to get infos about assembler. I'd recommend you to join the MICROCHIP forums that mainly deal with assembler language.

As a bonus, I greatly encourage you to read and Download THIS :

http://www.mikroe.com/en/books/picmcubook/ch1/ ... ( all chapters )

That might help you to understand what you try to play with ...

Alain

[comwarrior]

Acetronics;
This is a GENERAL forum, so it's GENERAL information and questions.

Lionheart;
from what Acetronics has said the answer is no... the PIC12's don't have hardware maths, so you'll have to do multiply and devide in software...

I'd reccomend if your PIC is going to be doing a lot of advanced maths then you'll definatly want to use a PIC18, the cost diference alone is not that much and means programs run a hell of a lot faster.

[Acetronics2]

Acetronics;
This is a GENERAL forum, so it's GENERAL information and questions.

.

YOU WRONG !!! NEVER BEEN A GENERAL FORUM ( you quite new here - end of june 2009 - ..., so read a bit before making YOUR rules. )

MEL PICBASIC Forum

... everything in the title !!!

General
Area for general PIC BASIC discussion

You are in THIS SECTION ...

This is a PicBasic Forum ... but that doesn't mean some help can't be given for Assembler including .

Alain

[Darrel Taylor]

You're right, this is a PicBasic forum.

And assembly language is a "HUGE" part of PicBasic Pro.
If you don't know ASM, then you only know HALF or less of what PBP has to offer.

Instead of telling people to go away...
Learn ASM and help them. Or learn ASM in the process of helping them.

You will be better off in the long run.
<br>

[Lionheart]

Thanks for the info.

Acetronics:
As you have guessed i am ideed a beginner with PIC controllers i only have some experience with the 8051 family. I will certainly read the info you gave me.

comwarrior:

I'd reccomend if your PIC is going to be doing a lot of advanced maths then you'll definatly want to use a PIC18, the cost diference alone is not that much and means programs run a hell of a lot faster.

I originally thought that all PIC controllers had the multiply tool build in so i already bought the controller, but there isn't that many mathts so it should be doable. You learn from your mistakes, so next time i don't make the same mistake hopefullyhttp://www.picbasic.co.uk/forum/images/icons/icon7.gif.