|
Ok, Downloaded the hyperterminal for vista and bought the serial to usb cable.
Progress:
Checked all locations using at+cmgl=" REC READ", "REC UNREAD" STO SENT & UNSENT.
All show no sign of an remaining sms.
After that:
Sent an sms to my phone. Did at+cmgr=1, but it shows +cmgr: 0, ,0
Then I did at+cmgl="REC UNREAD" - - - Result is only OK ( No sign of an received sms at all.
What settings should be used for CPMS & CNMI?
I have got cpms as sm, sm, sm & CNMI as 2,0,0,1 - Are these correct?
Last edited by financecatalyst; - 2nd October 2009 at 18:17.
|
Its working now: this is what I did:
CNMI=00001
CNMS=me, me, mt ' stores and reads from TA memory & NOT sim
What I would like to do is change it to store, read, delete from sim only. I know I have to change CNMS=SM, SM, SM but for this to take effect I need help in changing value of CNMI (Which I am unable to figure out)
Any advise on CNMI values?
Thanks
|
Any advise on CNMI values?
I have never used the sim memory. There are problem with the reading of incoming sms.
It will work pretty well with "MT". Remember that you will delete the sms immediatly after reading it. Otherwise you will not be able to locate it.
Al.
Last edited by aratti; - 4th October 2009 at 23:23.
All progress began with an idea
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks