MOSFETS and Solenoids

Results 1 to 26 of 26

Threaded View

  1. - 28th September 2009, 05:36 #7
    Jerson's Avatar
    Jerson
    Jerson is online now SuperMod
    Join Date
    Nov 2005
    Location
    Bombay, India
    Posts
    971

    Did you find this post helpful? Yes | No

    Default

    I would prefer seeing just the copper layers without the overlaying idents. However, first impressions, GND signal traces are way too thin to be useful unless you have copper filled your board for the GND net. The way it is now, you will get huge surges on the GND line whenever a MOSFET switches. The GND trace, if not copper filled plane, should be at least as thick as the traces on Stages 5,6,7,8
    Last edited by Jerson; - 28th September 2009 at 05:41.
    Embedded Systems Designer
    http://jerson.co.in
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules