2.60 + MCSP problems


Results 1 to 15 of 15

Threaded View

  1. #2
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653


    Did you find this post helpful? Yes | No

    Wink

    Hi, Henrik

    I had some little ( compared to yours ) surprises with PBP2.60 installation.

    I took the following lessons:

    1) place MPLAB and PBP into their DEFAULT locations ...
    2) Do not use MCS+ AND MPLAB for the moment ( I got "garbage" into MPLAB after having used MCS ...) so, wait and see ...
    3) Point MCS+ MANUALLY to your PBP2.60 folder ... Auto detection is somewhat fuzzy if you had installed multiple PBP into different locations ...

    Now, There's the langage tool to be modified somewhat in MPLAB. Download RELEVANT instructions from Melabs ...


    I did not open MCS+ from the time I had trouble ... and MPLAB works like a charm !!!

    Coincidence ??? I do not want to know !!!

    Begin by removing MPLAB 8.36 and PBP from the "add/remove programs" panel of Windows ( you also can make some room with older MPLAB versions ...)

    Alain
    Last edited by Acetronics2; - 26th September 2009 at 14:47.
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************

Similar Threads

  1. MCSP, PBP260, Win7 - is it impossible?
    By HenrikOlsson in forum General
    Replies: 18
    Last Post: - 26th January 2010, 17:08
  2. MCSP - Cannot find include file
    By Andy Wood in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 21st January 2008, 01:37
  3. MCSP Loader Problem pls help
    By Nestyplus in forum General
    Replies: 5
    Last Post: - 17th February 2006, 04:07
  4. Problems with 16F876 on interrupts an WRITE / READ
    By BigWumpus in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 20th December 2005, 14:38
  5. Replies: 1
    Last Post: - 31st August 2005, 20:00

Members who have read this thread : 0

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts