Hello friends My English is not very good (sorry)
I need to do a project for a servo motor in PICBASIC Pro
1 button to direct
1 button to the left
1 potentiometer for speed control
when the buttons are not press engine stopped
Obrigado Brazil
sterpper control
Hello friends My English is not very good (sorry)
I need to do a project for a servo motor in PICBASIC Pro
1 button to direct
1 button to the left
1 potentiometer for speed control
when the buttons are not press engine stopped
Obrigado Brazil
|
The treasure is under your feet ...
Hi, Sergio
Welcome to the Forum.
It's a stepper ... Ok,Ok ... ( Thanks Dave !!! )
What do you use for position feedback or initial position ???
Alain
Last edited by Acetronics2; - 22nd September 2009 at 17:31.
************************************************** ***********************
Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
************************************************** ***********************
IF there is the word "Problem" in your question ...
certainly the answer is " RTFM " or " RTFDataSheet " !!!
*****************************************
|
http://www.picbasic.co.uk/forum/showthread.php?p=75028
http://www.picbasic.co.uk/forum/showthread.php?t=10030
Might get you started. If it is a STEPPER.
Dave
Always wear safety glasses while programming.
|
servo
thanks
by links
I will compile and work on them
I am posting the design of the circuit
then put the program
if not asking too much: I would like opinions
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks