T2400 Con 0
is pretty much setting the baud to "0"'
Like I said before, scratch the CON
Here is a project using a serial LCD
http://www.rentron.com/PicBasic/one-wire3.htm
|
T2400 Con 0
is pretty much setting the baud to "0"'
Like I said before, scratch the CON
Here is a project using a serial LCD
http://www.rentron.com/PicBasic/one-wire3.htm
Dave
Always wear safety glasses while programming.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks