please tel me how to make a gprs connection

Results 1 to 5 of 5

Threaded View

  1. - 7th September 2009, 12:32 #2
    aratti's Avatar
    aratti
    aratti is offline Senior Member
    Join Date
    May 2008
    Location
    Italy
    Posts
    825

    Default

    Welcome to the forum.

    After having plugged in the antenna, SIM card, and serial cable. Power on the unit, open up a serial port communication program ( HyperTerminal or any other serial com program) and connect @ 115200 bps, 8 data bits, no parity, 1 stop bits, no flow control.

    Sending the proper AT commands should result in the message "OK" being received.

    The device supports standard AT commands therefore it should be possible to use some code already tested. Search the forum for that.

    Al.
    Last edited by aratti; - 7th September 2009 at 12:35.
    All progress began with an idea
« Previous Thread | Next Thread »

Similar Threads

  1. Change On Interrupt, PIC16F884
    By elec_mech in forum mel PIC BASIC Pro
    Replies: 17
    Last Post: - 14th November 2008, 17:25
  2. CO2 MG811 sensor connection
    By elektoro2009 in forum mel PIC BASIC Pro
    Replies: 6
    Last Post: - 8th May 2008, 00:49
  3. Automatic VB6 to pic serial connection
    By arniepj in forum Code Examples
    Replies: 13
    Last Post: - 10th January 2008, 07:57
  4. How come they make electronics hard as poss
    By George in forum Off Topic
    Replies: 9
    Last Post: - 13th July 2007, 23:54
  5. RC - connection using RCTime produces strange results
    By selbstdual in forum mel PIC BASIC Pro
    Replies: 0
    Last Post: - 8th February 2007, 16:16

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules