Problem with PIC16F87

Results 1 to 40 of 44

Threaded View

  1. - 13th September 2009, 14:16 #18
    The Master's Avatar
    The Master
    The Master is offline Senior Member
    Join Date
    Jun 2007
    Location
    Mansfield, UK
    Posts
    697

    Did you find this post helpful? Yes | No

    Default

    Sorry, I just realised that schematic is slightly wrong. The POT should connect to pin 7. Its connected right on the PCB though.

    Ive uploaded the corrected schematic. I found the website i thought i got it from but it seems i didnt use that one (i dont think i got it to work). The circuit i used is one of the example circuits in PCB Wizard. Ive uploaded a screenshot of that too.

    In my circuit ive used a 15K resistor and a 5K POT in series instead of the 100K VR in the example and ive used a 1nF cap instead of 100uF
    Attached Images Attached Images   
    2019 Yardhaunt Pictures
« Previous Thread | Next Thread »

Similar Threads

  1. problem using GOSUB under interrupt
    By fobya71 in forum mel PIC BASIC Pro
    Replies: 10
    Last Post: - 5th March 2010, 19:52
  2. Problem to compile my program
    By wagner in forum Off Topic
    Replies: 5
    Last Post: - 7th July 2008, 20:17
  3. USART Problem , but don't know where, in pc? or in PIC?
    By precision in forum mel PIC BASIC Pro
    Replies: 0
    Last Post: - 15th July 2007, 08:12
  4. 1 slave 1 master 1 MAX232 1 problem ?
    By SuB-ZeRo in forum mel PIC BASIC Pro
    Replies: 19
    Last Post: - 31st July 2005, 22:59
  5. PORTA.PinNo = 1 ' problem
    By frank small in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 6th May 2004, 14:30

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules