PIC Beginner - Infrared Receiver and IR Protocol

[komoe01]

I changed pin assign.

The result is successfully done.

I test ten different kind of DVD Remote. Key positions are changed but all are work well.

Now I run my program for two different tasks using same key of two different remote (Sony and NEC Protocol).

** two ir protocol can use in same pic **

Adouston,
THANK YOU VERY MUCH for your kindly help.

I read NEC protocol and compare code.

Header is 9ms
- no header found, restart

If (stx<760) Then init

Space between header and body is 4.5ms
-wait space

While PortA.2=1:Wend

Each pulse is a 560µs long
A logical "1" takes 2.25ms to transmit (pulse 560µs + space )
a logical "0" is only half of that, being 1.125ms (pulse 560µs + space )

Please let me know:
1. How to calculate (pulse>100) is logic 1.
2. and PULSIN_MAX 1140 . why do you use 1140

I say again. Thanks.

Moe.