SEROUT Just Garbage!

[geckogrotto]

Ok cool I left it running for a while and got
80
90
A0
B0
all close so how do I program that into the chip?
I mean permanitly because I think I lost it on a number of chips when I very first started.
Using Pic Kit 1 I don't see a way to manually set it.

[geckogrotto]

Also could I get a sample of using SERIN?
I have tried this and it outputs the hello world and then waits there and never loops. So I can only assume that its not getting the "A" char when I try and send it.

InputSig var GPIO.0

loop:
SerOut Inputsig,N2400,["Hello World",13,10]
Serin InputSig,N2400,["A"]
Pause 200
GoTo loop

[mister_e]

SerOut Inputsig............
Serin InputSig............

must be a copy/paste error...

[geckogrotto]

SerOut Inputsig............
Serin InputSig............

must be a copy/paste error...

Not sure what you are trying to tell me but I'm still stuck.

[mister_e]

you send on the same pin you receive?

[geckogrotto]

Oh lol yea guess that wouldn't work well thanks... hmm How do you send to serial port on a different serial pin? Now I understand the problem im confused on how to fix it lol.

I seem to have a lot of "Only learning opportunities." but atleast im learning

[mister_e]

how about something like

'12F675
@ __CONFIG _INTRC_OSC_NOCLKOUT & _WDT_ON & _PWRTE_ON & _MCLRE_OFF & _BODEN_ON
DEFINE OSCCAL_1K 1
INCLUDE "modedefs.bas"
TX_Pin var GPIO.0    'To DB9 RX pin 2
RX_Pin var GPIO.1    'To DB9 TX pin 3

TRISIO.0 = 0         'Set GPIO.0 to output.
TRISIO.1 = 1         'Set GPIO.1 to input     

ANSEL = 0            'disable ADCs
CMCON = 7            'disable comparator

AChar var byte
tx_pin = 0           'inverted mode idle state

achar="A"
Pause 100            'OSC settle time... 

loop:
    SerOut tx_pin,N2400,["Waiting for ",achar,13,10]
    SERIN  rx_pin,N2400,[achar]   
    serout tx_pin,N2400,["Got it...",13,10]
    goto loop