Help Getting Started


Results 1 to 11 of 11

Threaded View

  1. #9
    Join Date
    Aug 2006
    Location
    Look, behind you.
    Posts
    2,818


    Did you find this post helpful? Yes | No

    Default

    Hi Fred,
    Make sure which "Compile" you are using ICD Compile does not work unless you are using the ICD. PBP generates an INTEL Hex file and that is what your programmer needs to find, and load onto the chip. It generates asm and mac and some others too. All with the filename you chose.
    My comments regarding the 16f628 . . . is due to their not having adcon ansel . . .
    According to the info that came with the compiler, for the 16F series, the IDE automatically uses MPASMWIN
    PBP usually defaults to it's own assembler in MCS to use mpasm you have to change the setting . . . file, view, compiler options, assembler tab, check box use mpasm
    Last edited by Archangel; - 25th August 2009 at 05:00.
    If you do not believe in MAGIC, Consider how currency has value simply by printing it, and is then traded for real assets.
    .
    Gold is the money of kings, silver is the money of gentlemen, barter is the money of peasants - but debt is the money of slaves
    .
    There simply is no "Happy Spam" If you do it you will disappear from this forum.

Similar Threads

  1. Trying to get started w/ HPWM
    By circuitpro in forum mel PIC BASIC Pro
    Replies: 10
    Last Post: - 20th February 2010, 18:42
  2. getting started
    By cunninghamjohn in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 15th November 2008, 18:42
  3. Getting started... again...
    By Neosec in forum mel PIC BASIC Pro
    Replies: 10
    Last Post: - 31st May 2008, 02:09
  4. How did you get started .....
    By keithdoxey in forum General
    Replies: 25
    Last Post: - 13th April 2007, 19:29
  5. getting started with a PIC 18F4550
    By bigbear in forum General
    Replies: 2
    Last Post: - 16th October 2006, 02:31

Members who have read this thread : 0

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts